Category: News

NEW VIDEO: Comparing ASIC vs RIG. KADENA vs ETHEREUM. Which is the most profitable? 06/2022

Hello Miners! ⛏

We have uploaded a video to YOUTUBE where we compared a KADENA ASIC against a ETHEREUM RIG. In it we explain the differences between them and their respective returns.

We highlight some of their main differences:

Differences between a KADENA ASIC and a mining RIG

IBELINK K1+MINING RIG
Prepared for mining in the Blake 2s-Kadena algorithm. In its algorithm there is only one coin: KADENA. High noise approximately 74Db. Consumption of 2,250w. Composed of Hash cards. More compact model, covered components. Less maintenance if the space meets the conditions* Less durability, obsolete components. Higher complexity of spare parts. Generates a lot of heat (similar to 3 stoves). Cost of the two machines: 35,900€. Prepared for mining more than a single algorithm. Can mine more than 200 coins. Each one of the Rigs consumes only 1,150w. Hardly generates noise, perfect for your home. Composed by Gpu's Components visible and exposed to the environment. Longer maintenance over time. Greater durability and less obsolescence. Easier supply of spare parts. Possibility of dual or triple mining. Generates little heat (similar to 1 stove). Racketable, possibility of stacking. Cost of the two machines: 25.000€.

*The conditions for a suitable environment are the following:

  • No humidityto have an ASIC, the ambient humidity must be less than one degree Celsius. 5-10%
  • VentilationOne of the most important things in a mining machine is the ventilation and air flow, allowing the machine to keep its temperature stable and work at high performances.
  • Mite freeFor a mining machine it is very important to set up in a clean place, since the fans, being high flow, absorb the air to cool the cards, which means that if they absorb dust from that air, it will enter the cards and cause them to overheat.
KADENA

I leave you the link so you can take a look at it: 

If it does not allow you to access the video click here.

*This video was recorded between March and April 2022 when Kadena was trading at approximately 6$ and Ethereum at 3,300 $.
*It should be clarified that the prices of the mining machines have been reduced with respect to the video due to the fall of the market.


Best regards and many criptos💸⛏

Our Social Networks:

 Instagram: @minandovoycom

Tiktok: @minandovoy

 How to contact us?

 WhatsApp: +34 654 20 11 39

E-mail: minandovoyinfo@gmail.com

MINANDO VOY RAFFLES SOLAR PANELS 2022

Hello Miners⛏️! 

Here we are again... didn't we tell you there would be another opportunity? This time within everyone's reach😉. 

How to enter the SOLAR PANELS raffle?

-Join our Telegram group, whose link is. https://t.me/minandovoy and follow the steps marked by the BOT in order to win the SOLAR PANELS.

WE MUST EMPHASIZE THAT: only those invitations in which the invited person joins the channel will be valid.

To know your participations you just have to write to the bot: /participaciones and it will send you the numbers assigned for the drawing.

LEGAL BASES OF THE SWEEPSTAKES HERE (in this link you can find all the info. related to the raffle).

PLACAS SOLARES

JASMINER X4 1U: NEW VIDEO ON MINANDOVOY 05/2022

Hi miners! How are you?

We stopped by to remind you that Mining I go has uploaded a new video talking about one of the best mining machines available today. ETHASHis the Jasminer X4 1Uan ideal model for working with the Ethereum network. In terms of capacity, this device is similar to having 5 graphics cards to mine ETH, with no need for a mining RIG and with barely 240 W power consumption generating a mining power of 520 Mhs.

The following points should be noted about the machine:

- It is a compact ASIC and thanks to its size and shape (similar to a switch), it can be stacked in a rackThis reduces heat and noise.

jasminer X4 1U

- Like all ASICs it is connected via Internet cable.

- It takes approximately 30 minutes to start up and start to run. mining.

Jasminer X4 1U configuration

- The configuration is simple, although perhaps if you are just starting with ASICs, it will be a little complicated, the steps are as follows:

  1.  You must locate the IP of the machine, you can use IP SCANNER.
  2. Copy and paste it into your preferred search engine.
  3. Once you access the machine (username and password): admin). Click on the left on the section ".Miner"and set up your pool (we use F2POOL).
  4. Registration in F2POOL It is very simple, you just have to follow the steps offered on the platform, you must provide an email and a password.
  5. Once you have configured your POOL, you can link it to the ASIC. You will need to copy the links that are similar to this "stratum+tcp://eth.f2pool.com:6679 " and paste them in their proper place (miner configuration).
  6. Once you click on save, the miner will start up past 30 minutesDon't be overwhelmed, it's normal for it to take so long. Once you are there, you will begin to see that you are generating cryptos and that the ASIC is operating normally.

*Binance pool is not available on this model.

The machine's reward in the moment of the video recording was 21,18$ gross (light must be deducted if applicable).

With the Jasminer X4 1U as well. you can mine another currencyprovided that it is found to be within the same algorithmin this case ETHASH.

The currency that follows behind ETHEREUM, it's ETHEREUM CLASSIC (ETC)which, at the time the video was recorded, was generating a daily return on investment of of 18,26$.

SUBSCRIBE, LIKE AND SHARE THIS VIDEO WITH YOUR FRIENDS, SO THAT THEY CAN ALSO LEARN ABOUT CRYPTOCURRENCY MINING AND START GENERATING PASSIVE INCOME. WITH MACHINES LIKE THIS JASMINER X4 1U.

Our Social Networks:

 Instagram: @minandovoycom

Tiktok: @minandovoy

 How to contact us?

 WhatsApp: +34 654 20 11 39

E-mail: contacto@minandovoy.com

MINING HOSTING

We have a miner hosting, certified by MinandoVoy. This rig is located in the autonomous community of Catalonia, more specifically in Barcelona.

I will tell you a little about the details of the hosting:

- Rig up to 12 cards 99€/monthly + Electricity consumption 0.18 KW/h (July 2022 to July 2023)

- The entrance of the rigs in our facilities, will be with previous authorization of our quality personnel.

- For overhauls/repairs, they will have authorized access:

- Rig builder and Rig Store quality/monitoring personnel.

- Any personnel may be restricted from the Rig Store Barcelona premises, if deemed appropriate by the rig owner and/or Rig Store Barcelona.

Xavi, is the owner and the main manager of the space, so he will be happy to help you with any of your questions, I leave his contact details below:

629239008 (XAVI PALAU)

rigstorebarcelona@gmail.com

MINANDO RAFFLES A MINIRIG 07/2022

Hello Miners!💸⛏️

Since the first raffle we have held you have asked us to raffle a mining RIG and your wishes are our orders... here it is, a MINI RIG raffle!🤑

MINIRIG

Steps to follow to win a MiniRig


⛏️Tenéis to follow @minandovoycom
👥Share this post in your storie and mention us
⚡ EXTRA BONUS! If you mention @ to 3 different friends you will have more chances that the MINIRIG will be yours (the more you mention the more chances you will have)⚡

🌏 The sweepstakes is INTERNATIONAL


Best of luck!!!🍀🤞🏼

The raffle is until July 22nd at 15:00 in the afternoon, the winner will be announced through our blog at our website.


Remember that you can access to the legal bases by clicking here here.